{"product_id":"san-dynasty-pod","title":"San Dynasty Pod","description":"\u003csection class=\"vapeverse_products_specs\"\u003e\n  \u003cdiv class=\"vapeverse_products_specs-content\"\u003e\n    \u003ch2\u003eSan Dynasty Pods: Price and At a Glance\u003c\/h2\u003e\n    \u003cp\u003eSan Dynasty Replacement Pods are 2ml refillable pods for the San Dynasty and San Dynasty Pro kits, supplied in packs of three with a mesh coil built into each pod and a choice of three resistances. They arrive empty, so a bottle of e-liquid is a separate purchase. The table below covers everything a buyer usually wants to confirm before adding a pack to the basket.\u003c\/p\u003e\n    \u003cdiv class=\"vapeverse_products_table-wrapper\"\u003e\n      \u003cdiv class=\"table-wrapper\"\u003e\n        \u003ctable class=\"vapeverse_products_table\"\u003e\n          \u003cthead\u003e\n            \u003ctr\u003e\n              \u003cth\u003eAt a Glance\u003c\/th\u003e\n              \u003cth\u003eDetail\u003c\/th\u003e\n            \u003c\/tr\u003e\n          \u003c\/thead\u003e\n          \u003ctbody\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eProduct type\u003c\/td\u003e\n              \u003ctd\u003eRefillable replacement pod\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003ePod capacity\u003c\/td\u003e\n              \u003ctd\u003e2ml\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003ePack size\u003c\/td\u003e\n              \u003ctd\u003e3 pods\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eResistances available\u003c\/td\u003e\n              \u003ctd\u003e0.4Ω, 0.6Ω, 0.8Ω\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eResistance per pack\u003c\/td\u003e\n              \u003ctd\u003eOne resistance only, three identical pods\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eCoil\u003c\/td\u003e\n              \u003ctd\u003eMesh, built into the pod\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eCoil replaceable\u003c\/td\u003e\n              \u003ctd\u003eNo, the pod is the replaceable part\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSupplied filled\u003c\/td\u003e\n              \u003ctd\u003eNo, the pods ship empty\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eFits\u003c\/td\u003e\n              \u003ctd\u003eSan Dynasty and San Dynasty Pro\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eFilter tips\u003c\/td\u003e\n              \u003ctd\u003eIncluded\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eE-liquid required\u003c\/td\u003e\n              \u003ctd\u003eYes, purchased separately\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eStock\u003c\/td\u003e\n              \u003ctd\u003e100% UK compliant\u003c\/td\u003e\n            \u003c\/tr\u003e\n          \u003c\/tbody\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eWhat You Are Actually Buying\u003c\/h3\u003e\n    \u003cp\u003eThe San Dynasty pod is the consumable half of the San Dynasty system. Your kit supplies the battery, the chassis and the charging port, and it keeps working indefinitely. The pod supplies the tank and the coil together in a single sealed unit, and that unit is what wears out. When the flavour from your current pod fades, you fit a fresh San Dynasty pod, fill it, and the kit performs exactly as it did on day one.\u003c\/p\u003e\n    \u003cp\u003eThat split matters commercially as well as practically. Because the coil is built into the pod rather than screwed into it, you never buy coils for a San Dynasty kit. There is no separate San Dynasty coil product to hunt for, no resistance head to unscrew, and nothing to dismantle. The pod is the whole maintenance story for this device, which makes ownership simple to budget for and simple to restock.\u003c\/p\u003e\n\n    \u003ch3\u003eBuying a Three-Pack\u003c\/h3\u003e\n    \u003cp\u003eEvery San Dynasty pack contains three pods of one resistance. If you order the 0.6Ω pack, you receive three 0.6Ω pods. You do not receive one 0.4Ω, one 0.6Ω and one 0.8Ω, and there is no mixed pack option. This is worth pausing on, because a buyer who assumes a sampler pack will find themselves committed to a single draw style for three pods' worth of use. If you want to try more than one resistance, order more than one pack.\u003c\/p\u003e\n\n    \u003ch3\u003ePricing and Availability\u003c\/h3\u003e\n    \u003cp\u003ePricing for San Dynasty Replacement Pods is shown live on this page and again at checkout, so the figure you see is the current one for the resistance and quantity you have selected. Multibuy and bundle savings, where they apply, are displayed at the same points in the journey. Because the pods are the consumable part of the system and each pack covers three replacement cycles, most owners find it more economical to restock in packs than to buy singly, and keeping a spare pod in a drawer means the kit is never waiting on a delivery.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_specs\"\u003e\n  \u003cdiv class=\"vapeverse_products_specs-content\"\u003e\n    \u003ch2\u003eWhich San Dynasty Pod Resistance Should You Buy?\u003c\/h2\u003e\n\n    \u003cdiv class=\"image-wrapper\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/7849\/4036\/files\/Which_San_Dynasty_Pod_Resistance_Should_You_Buy.jpg?v=1788011148\" alt=\"Which San Dynasty Pod Resistance Should You Buy\"\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003eOn a pod sold in three resistances, the resistance is the purchase. Choose 0.8Ω for a tight, cigarette-like mouth-to-lung draw, 0.6Ω for a middle setting that suits most people, and 0.4Ω for a warmer, more open restricted direct-to-lung draw with more vapour per puff. The table below sets the three side by side, and the sections underneath explain what each one feels like in daily use.\u003c\/p\u003e\n    \u003cdiv class=\"vapeverse_products_table-wrapper\"\u003e\n      \u003cdiv class=\"table-wrapper\"\u003e\n        \u003ctable class=\"vapeverse_products_table\"\u003e\n          \u003cthead\u003e\n            \u003ctr\u003e\n              \u003cth\u003eResistance\u003c\/th\u003e\n              \u003cth\u003eDraw Style\u003c\/th\u003e\n              \u003cth\u003eSuggested Wattage\u003c\/th\u003e\n              \u003cth\u003eE-Liquid That Suits It\u003c\/th\u003e\n              \u003cth\u003eBest For\u003c\/th\u003e\n            \u003c\/tr\u003e\n          \u003c\/thead\u003e\n          \u003ctbody\u003e\n            \u003ctr\u003e\n              \u003ctd\u003e0.8Ω\u003c\/td\u003e\n              \u003ctd\u003eTighter MTL\u003c\/td\u003e\n              \u003ctd\u003e12W to 16W\u003c\/td\u003e\n              \u003ctd\u003eNicotine salt, 50\/50\u003c\/td\u003e\n              \u003ctd\u003eCigarette-like draw, longest liquid economy\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003e0.6Ω\u003c\/td\u003e\n              \u003ctd\u003eMTL to light RDL\u003c\/td\u003e\n              \u003ctd\u003e18W to 23W\u003c\/td\u003e\n              \u003ctd\u003eNicotine salt, 50\/50\u003c\/td\u003e\n              \u003ctd\u003eMiddle ground, the safe first choice\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003e0.4Ω\u003c\/td\u003e\n              \u003ctd\u003eRDL, more open\u003c\/td\u003e\n              \u003ctd\u003e25W to 30W\u003c\/td\u003e\n              \u003ctd\u003eLower-strength freebase, 50\/50\u003c\/td\u003e\n              \u003ctd\u003eWarmer vapour, more airflow\u003c\/td\u003e\n            \u003c\/tr\u003e\n          \u003c\/tbody\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003eThe wattage figures above are published as guidance rather than as a manufacturer specification. They appear on a single retailer listing and are not corroborated elsewhere, so treat them as a starting range and verify them against the manual supplied with your kit. In practice the San Dynasty device sets a starting wattage automatically when you insert a pod and reads its resistance, so these numbers are for fine-tuning rather than for initial setup. You are adjusting from a working baseline, not building one from scratch.\u003c\/p\u003e\n    \u003cp\u003eOne point before the individual breakdowns. Mouth-to-lung and restricted direct-to-lung are preferences, not tiers. Neither is more advanced, better value or a natural progression from the other. Plenty of long-term vapers stay on a tight MTL draw for years because that is the draw they enjoy, and plenty of others find anything tighter than RDL uncomfortable. Pick the one that matches how you actually want to inhale.\u003c\/p\u003e\n\n    \u003ch3\u003e0.8Ω: The Tightest Draw\u003c\/h3\u003e\n    \u003cp\u003eThe 0.8Ω San Dynasty pod produces the tightest, most restricted draw of the three. Air passes through a narrower path, the vapour arrives cooler and denser in the mouth, and the inhale pattern closely resembles drawing on a cigarette: pull into the mouth first, then inhale. Suggested wattage sits at 12W to 16W, the lowest of the three, which means the coil consumes e-liquid more slowly and a 2ml fill lasts noticeably longer than it would at higher power.\u003c\/p\u003e\n    \u003cp\u003eThis is the resistance to choose if you are coming to a refillable kit from cigarettes or from a disposable-style device with a tight mouthpiece, and it is the natural pairing for nicotine salt e-liquid. It is also the most economical of the three on liquid consumption, which matters more than people expect once you are buying bottles regularly.\u003c\/p\u003e\n\n    \u003ch3\u003e0.6Ω: The Middle Ground\u003c\/h3\u003e\n    \u003cp\u003eThe 0.6Ω pod sits between the other two and is the most broadly comfortable of the three. The draw is still recognisably mouth-to-lung but looser than the 0.8Ω, with a slightly warmer vapour and a little more volume on the exhale. Suggested wattage is 18W to 23W. It works well with nicotine salts and with balanced 50\/50 freebase e-liquid, which makes it flexible if you have not settled on one type of liquid yet.\u003c\/p\u003e\n    \u003cp\u003eIf you are unsure which resistance to order and you have no strong feeling about draw style, 0.6Ω is the sensible first pack. It is close enough to the 0.8Ω that an MTL vaper will get on with it, and close enough to the 0.4Ω that someone who prefers a more open draw will not feel restricted. You learn which direction you want to move in without committing to either extreme.\u003c\/p\u003e\n\n    \u003ch3\u003e0.4Ω: The Most Open Draw\u003c\/h3\u003e\n    \u003cp\u003eThe 0.4Ω pod is the lowest resistance and the most open. It suits a restricted direct-to-lung draw, where you inhale straight into the lungs against some airflow resistance rather than holding vapour in the mouth first. Suggested wattage is 25W to 30W, and the vapour arrives warmer and in greater volume than from the other two pods. This is a factual description of how a lower-resistance mesh coil behaves at higher power, and it says nothing about what any individual takes in over a session or a day.\u003c\/p\u003e\n    \u003cp\u003eThe trade-off is consumption. At 25W to 30W the coil turns e-liquid into vapour faster, so a 2ml fill empties sooner and you will refill more often than a 0.8Ω user. This is also the resistance that pairs with lower-strength freebase e-liquid rather than high-strength nicotine salt, for reasons covered in the e-liquid section below.\u003c\/p\u003e\n\n    \u003ch3\u003eHow to Decide if You Are Still Unsure\u003c\/h3\u003e\n    \u003cp\u003eWork backwards from the draw you already know you like. If your current device has a tight mouthpiece and you inhale in two stages, order 0.8Ω. If you inhale straight down and want airflow, order 0.4Ω. If neither description fits, or you are new to refillable kits entirely, order 0.6Ω and adjust from there on your next pack. Because a pack contains three pods of one resistance, you will have plenty of time to form an opinion before you need to reorder, and switching resistance later costs nothing more than the price of a different pack. Nothing about the kit itself needs to change.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_specs\"\u003e\n  \u003cdiv class=\"vapeverse_products_specs-content\"\u003e\n    \u003ch2\u003eWhich Kits Do San Dynasty Pods Fit?\u003c\/h2\u003e\n\n    \u003cdiv class=\"image-wrapper\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/7849\/4036\/files\/Which_Kits_Do_San_Dynasty_Pods_Fit.jpg?v=1788011149\" alt=\"Which Kits Do San Dynasty Pods Fit\"\u003e\n    \u003c\/div\u003e\n\n    \u003cp\u003eSan Dynasty Replacement Pods fit both the San Dynasty and the San Dynasty Pro. The two devices use the same pod, so a single pod purchase covers either kit, and an owner of both can move a pod between them.\u003c\/p\u003e\n    \u003cdiv class=\"vapeverse_products_table-wrapper\"\u003e\n      \u003cdiv class=\"table-wrapper\"\u003e\n        \u003ctable class=\"vapeverse_products_table\"\u003e\n          \u003cthead\u003e\n            \u003ctr\u003e\n              \u003cth\u003eDevice\u003c\/th\u003e\n              \u003cth\u003eBattery\u003c\/th\u003e\n              \u003cth\u003eTakes This Pod\u003c\/th\u003e\n            \u003c\/tr\u003e\n          \u003c\/thead\u003e\n          \u003ctbody\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSan Dynasty Pro\u003c\/td\u003e\n              \u003ctd\u003e16500\u003c\/td\u003e\n              \u003ctd\u003eYes\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSan Dynasty (standard)\u003c\/td\u003e\n              \u003ctd\u003e14500\u003c\/td\u003e\n              \u003ctd\u003eYes\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eAny other brand or kit\u003c\/td\u003e\n              \u003ctd\u003eNot applicable\u003c\/td\u003e\n              \u003ctd\u003eNo\u003c\/td\u003e\n            \u003c\/tr\u003e\n          \u003c\/tbody\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eSan Dynasty Pro\u003c\/h3\u003e\n    \u003cp\u003eThe San Dynasty Pro pod kit is the larger of the two devices, built around a 16500 battery. It takes these pods directly with no adapter, no modification and no compatibility caveat, and the resistance you choose behaves the same way in the Pro as it does in the standard model. If the Pro is the kit you own, any of the three resistances on this page is a straight fit.\u003c\/p\u003e\n\n    \u003ch3\u003eSan Dynasty (Standard)\u003c\/h3\u003e\n    \u003cp\u003eThe standard San Dynasty runs a smaller 14500 battery in a more compact body. It takes the same pod. The difference between the two devices is the battery and the chassis around it, not the pod interface, which is why a single pod line serves both.\u003c\/p\u003e\n\n    \u003ch3\u003eAre San Dynasty and San Dynasty Pro Pods the Same?\u003c\/h3\u003e\n    \u003cp\u003eYes. There is no separate Pro pod and no separate standard pod. The pod on this page is the pod for both kits, and there is no risk of ordering the wrong version for your device. The only decision you need to get right at the point of purchase is the resistance, which the section above covers in detail.\u003c\/p\u003e\n\n    \u003ch3\u003eCross-Brand Compatibility\u003c\/h3\u003e\n    \u003cp\u003eSan Dynasty pods are proprietary to the San Dynasty platform. They do not fit pod kits from other manufacturers, and pods from other manufacturers do not fit a San Dynasty kit, regardless of how similar the dimensions look. Pod interfaces vary in magnet placement, contact position and airflow channel even between devices that appear alike from the outside, so a pod that seats physically may still fail to make contact or seal properly. If you own a San Dynasty or a San Dynasty Pro, this is the pod line for it.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_box\"\u003e\n  \u003cdiv class=\"vapeverse_products_box-inner\"\u003e\n    \u003cdiv class=\"vapeverse_products_box-content\"\u003e\n      \u003ch2\u003eWhat's in a Pack, and What You Replace\u003c\/h2\u003e\n      \u003cp\u003eA San Dynasty pack contains three refillable pods of one resistance, each with its mesh coil already built in, plus filter tips. The pods arrive empty. The table sets out what is in the box and what each item does.\u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"vapeverse_products_box-image\"\u003e\n      \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0551\/7849\/4036\/files\/What_s_in_the_Box..jpg?v=1788011145\" alt=\"What's in a San Dynasty Pod Pack\"\u003e\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_specs\"\u003e\n  \u003cdiv class=\"vapeverse_products_specs-content\"\u003e\n    \u003cdiv class=\"vapeverse_products_table-wrapper\"\u003e\n      \u003cdiv class=\"table-wrapper\"\u003e\n        \u003ctable class=\"vapeverse_products_table\"\u003e\n          \u003cthead\u003e\n            \u003ctr\u003e\n              \u003cth\u003eItem\u003c\/th\u003e\n              \u003cth\u003eQuantity\u003c\/th\u003e\n              \u003cth\u003eNotes\u003c\/th\u003e\n            \u003c\/tr\u003e\n          \u003c\/thead\u003e\n          \u003ctbody\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eRefillable pods\u003c\/td\u003e\n              \u003ctd\u003e3\u003c\/td\u003e\n              \u003ctd\u003eAll of one resistance, coil built in\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eFilter tips\u003c\/td\u003e\n              \u003ctd\u003eIncluded\u003c\/td\u003e\n              \u003ctd\u003eFitted to the pod mouthpiece\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eE-liquid\u003c\/td\u003e\n              \u003ctd\u003eNone\u003c\/td\u003e\n              \u003ctd\u003eSupplied empty, purchased separately\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eLoose coils\u003c\/td\u003e\n              \u003ctd\u003eNone\u003c\/td\u003e\n              \u003ctd\u003eThe coil is built into the pod\u003c\/td\u003e\n            \u003c\/tr\u003e\n          \u003c\/tbody\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eThree Pods of One Resistance\u003c\/h3\u003e\n    \u003cp\u003eThis is worth repeating because it is the single most common wrong expectation about this product, and neither of the competing listings states it plainly. A San Dynasty three-pack is three identical pods. The resistance you select at checkout is the resistance of all three. There is no mixed or sampler configuration, so if you want to compare 0.6Ω against 0.8Ω, that is two separate packs.\u003c\/p\u003e\n\n    \u003ch3\u003eThe Coil Is Built Into the Pod\u003c\/h3\u003e\n    \u003cp\u003eThe mesh coil sits permanently inside the base of each San Dynasty pod. It is not a screw-in head, it is not sold separately, and there is no coil replacement product for this device. When a coil is spent, the pod is spent, and you fit one of the other pods from your pack. Do not attempt to prise open, dismantle or dig into a pod to reach the coil. There is nothing serviceable inside, and the attempt will damage the seal and the pod along with it.\u003c\/p\u003e\n    \u003cp\u003eThis design is why the three-pack is the natural unit of purchase. Each pod is one full service cycle, so a pack represents three cycles of use before you need to reorder.\u003c\/p\u003e\n\n    \u003ch3\u003eThe Pods Ship Empty\u003c\/h3\u003e\n    \u003cp\u003eSan Dynasty pods are refillable, not prefilled. There is no e-liquid inside a new pack, and a bottle of e-liquid is a required second purchase before you can use one. If you are ordering pods and have nothing suitable at home, order liquid at the same time, because the pods on their own will not get you vaping. The next section covers exactly which types of e-liquid suit which resistance.\u003c\/p\u003e\n\n    \u003ch3\u003eFilter Tips\u003c\/h3\u003e\n    \u003cp\u003eFilter tips are supplied with the pack and fit at the mouthpiece end of the pod. They sit in the vapour path and are part of the standard configuration rather than an optional extra, so there is nothing additional to buy alongside them.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_specs\"\u003e\n  \u003cdiv class=\"vapeverse_products_specs-content\"\u003e\n    \u003ch2\u003eWhat E-Liquid Works in a San Dynasty Pod?\u003c\/h2\u003e\n    \u003cp\u003eSan Dynasty pods take standard bottled e-liquid, and the resistance you are running determines which type suits best. Nicotine salt and balanced 50\/50 e-liquid suit the 0.8Ω and 0.6Ω pods, while lower-strength freebase e-liquid suits the 0.4Ω. High-VG e-liquid is not suitable in any of them.\u003c\/p\u003e\n    \u003cdiv class=\"vapeverse_products_table-wrapper\"\u003e\n      \u003cdiv class=\"table-wrapper\"\u003e\n        \u003ctable class=\"vapeverse_products_table\"\u003e\n          \u003cthead\u003e\n            \u003ctr\u003e\n              \u003cth\u003eResistance\u003c\/th\u003e\n              \u003cth\u003eSuits\u003c\/th\u003e\n              \u003cth\u003eWhy\u003c\/th\u003e\n            \u003c\/tr\u003e\n          \u003c\/thead\u003e\n          \u003ctbody\u003e\n            \u003ctr\u003e\n              \u003ctd\u003e0.8Ω\u003c\/td\u003e\n              \u003ctd\u003eNicotine salt, 50\/50\u003c\/td\u003e\n              \u003ctd\u003eLow power, tight draw, slower liquid consumption\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003e0.6Ω\u003c\/td\u003e\n              \u003ctd\u003eNicotine salt, 50\/50\u003c\/td\u003e\n              \u003ctd\u003eMiddle power, works with either liquid type\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003e0.4Ω\u003c\/td\u003e\n              \u003ctd\u003eLower-strength freebase, 50\/50\u003c\/td\u003e\n              \u003ctd\u003eHigher power and greater vapour volume per puff\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eAny\u003c\/td\u003e\n              \u003ctd\u003eNot high-VG\u003c\/td\u003e\n              \u003ctd\u003eToo thick to wick reliably through a 2ml pod\u003c\/td\u003e\n            \u003c\/tr\u003e\n          \u003c\/tbody\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eNicotine Salt E-Liquid\u003c\/h3\u003e\n    \u003cp\u003eNicotine salts pair naturally with the 0.8Ω and 0.6Ω pods. Salt formulations are absorbed more quickly than freebase nicotine and stay smoother on the throat at higher strengths, which is why they suit the low-power, tighter-draw end of the San Dynasty range. Bottled 10ml nic salts and 50\/50 e-liquids are the standard companion purchase for these two resistances, and because a San Dynasty pod is refillable you can change flavour with every fill rather than being tied to whatever a sealed pod contains.\u003c\/p\u003e\n\n    \u003ch3\u003eFreebase E-Liquid\u003c\/h3\u003e\n    \u003cp\u003eThe 0.4Ω pod runs at higher wattage and produces more vapour per puff, which is why lower-strength freebase e-liquid is the better pairing for it. A balanced 50\/50 blend still wicks properly through a 2ml pod at this resistance, so the liquid type changes while the VG\/PG ratio does not.\u003c\/p\u003e\n\n    \u003ch3\u003eNicotine Strength and the UK Limit\u003c\/h3\u003e\n    \u003cp\u003eNicotine-containing e-liquid sold in the UK is capped at 20mg\/ml, which is 2% strength, and bottles are limited to 10ml. Every compliant e-liquid you can legally buy here sits at or below that ceiling, and nicotine-free options are also widely available.\u003c\/p\u003e\n    \u003cp\u003eWhich strength is right for you is not something this page will tell you. Nicotine strength is a personal decision that depends on your own circumstances, and if you want guidance on it, speak to a pharmacist, your GP or a local stop-smoking service rather than taking a number from a product listing. What matters from a hardware point of view is simply that the liquid you buy is legally compliant and that its VG\/PG ratio suits a 2ml refillable pod.\u003c\/p\u003e\n\n    \u003ch3\u003eWhy High-VG E-Liquid Does Not Work Here\u003c\/h3\u003e\n    \u003cp\u003eHigh-VG e-liquid, typically 70\/30 or thicker, is designed for sub-ohm tanks with large wicking ports and high power. It is too viscous to travel reliably through the wicking channels of a 2ml pod, and the practical result is starved cotton, a burnt taste and a pod that is finished long before it should be. This is a compatibility constraint rather than a safety matter, in the same way that diesel is not a warning label on a petrol car. Stick to 50\/50 blends and both the pod and the flavour will behave as intended.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_specs\"\u003e\n  \u003cdiv class=\"vapeverse_products_specs-content\"\u003e\n    \u003ch2\u003eSan Dynasty Pod Specifications\u003c\/h2\u003e\n    \u003cp\u003eThe table below lists the confirmed specifications for San Dynasty Replacement Pods, with a note on how well each figure is corroborated across sources. Where a figure rests on a single listing, it is marked as such rather than presented as settled.\u003c\/p\u003e\n    \u003cdiv class=\"vapeverse_products_table-wrapper\"\u003e\n      \u003cdiv class=\"table-wrapper\"\u003e\n        \u003ctable class=\"vapeverse_products_table\"\u003e\n          \u003cthead\u003e\n            \u003ctr\u003e\n              \u003cth\u003eSpecification\u003c\/th\u003e\n              \u003cth\u003eDetail\u003c\/th\u003e\n              \u003cth\u003eSource Confidence\u003c\/th\u003e\n            \u003c\/tr\u003e\n          \u003c\/thead\u003e\n          \u003ctbody\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eProduct type\u003c\/td\u003e\n              \u003ctd\u003eRefillable replacement pod\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003ePod capacity\u003c\/td\u003e\n              \u003ctd\u003e2ml\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eCoil\u003c\/td\u003e\n              \u003ctd\u003eMesh, built into the pod\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eCoil replaceable\u003c\/td\u003e\n              \u003ctd\u003eNo\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eResistances\u003c\/td\u003e\n              \u003ctd\u003e0.4Ω, 0.6Ω, 0.8Ω\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003ePack size\u003c\/td\u003e\n              \u003ctd\u003e3 pods, one resistance per pack\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSupplied filled\u003c\/td\u003e\n              \u003ctd\u003eNo, ships empty\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eFilter tips\u003c\/td\u003e\n              \u003ctd\u003eIncluded\u003c\/td\u003e\n              \u003ctd\u003eSingle retailer listing\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eCompatibility\u003c\/td\u003e\n              \u003ctd\u003eSan Dynasty and San Dynasty Pro\u003c\/td\u003e\n              \u003ctd\u003eCorroborated\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSuggested wattage\u003c\/td\u003e\n              \u003ctd\u003e0.4Ω 25W to 30W, 0.6Ω 18W to 23W, 0.8Ω 12W to 16W\u003c\/td\u003e\n              \u003ctd\u003eSingle source, guidance only, verify against the manual\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSuitable e-liquid\u003c\/td\u003e\n              \u003ctd\u003eNic salt and 50\/50, lower-strength freebase at 0.4Ω\u003c\/td\u003e\n              \u003ctd\u003eSingle retailer listing\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003ePrice\u003c\/td\u003e\n              \u003ctd\u003eNot published on this page, shown live at selection and checkout\u003c\/td\u003e\n              \u003ctd\u003eUnresolved across sources\u003c\/td\u003e\n            \u003c\/tr\u003e\n            \u003ctr\u003e\n              \u003ctd\u003eSecond competing retailer\u003c\/td\u003e\n              \u003ctd\u003eData unavailable, listing inaccessible at time of research\u003c\/td\u003e\n              \u003ctd\u003eDegraded, one fewer corroborating source\u003c\/td\u003e\n            \u003c\/tr\u003e\n          \u003c\/tbody\u003e\n        \u003c\/table\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eNotes on the Figures Above\u003c\/h3\u003e\n    \u003cp\u003eThree rows deserve a word of explanation, because publishing them without one would misrepresent how solid they are.\u003c\/p\u003e\n    \u003cp\u003eThe wattage row is the most useful content on this page and also its least corroborated fact. The three ranges come from a single retailer listing and are not repeated anywhere else, which means they should be treated as a starting point for fine-tuning rather than as a manufacturer specification. Check them against the manual that came with your kit. Since the device reads the pod's resistance and sets an opening wattage by itself, you are never relying on these numbers to get started.\u003c\/p\u003e\n    \u003cp\u003eThe price row is deliberately blank. Published figures for what appears to be the same three-pack differ widely enough between retailers that quoting either one, or a range spanning both, would be misleading. The live price on this page is the accurate figure for this listing, and that is the one to go by.\u003c\/p\u003e\n    \u003cp\u003eThe final row records a gap in the research rather than a property of the product. One of the two competing retailer listings could not be accessed during research, so several figures on this page rest on one source where they would otherwise rest on two. Where that is the case, the table says so.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_usage\"\u003e\n  \u003cdiv class=\"vapeverse_products_usage-content\"\u003e\n    \u003ch2\u003eHow to Fill, Prime and Change a San Dynasty Pod\u003c\/h2\u003e\n    \u003cp\u003eTo use a San Dynasty pod, fill it through the port on the pod body, let the e-liquid soak into the coil before you take a draw, and replace the pod when the flavour tells you it is finished. Priming is the step that matters most, because it is the one that ruins pods when it is skipped.\u003c\/p\u003e\n\n    \u003ch2 class=\"vapeverse_products_usage-subtitle\"\u003eHow to Fill a San Dynasty Pod\u003c\/h2\u003e\n\n    \u003cdiv class=\"vapeverse_products_usage-steps\"\u003e\n\n      \u003cdiv class=\"vapeverse_products_usage-step\"\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-number\"\u003e1\u003c\/div\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-text\"\u003e\n          \u003cp\u003eRemove the pod from the device and hold it with the fill port facing upward.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vapeverse_products_usage-step\"\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-number\"\u003e2\u003c\/div\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-text\"\u003e\n          \u003cp\u003eOpen the fill port by lifting the silicone stopper. Fold it clear rather than pulling it out completely, so it stays attached to the pod.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vapeverse_products_usage-step\"\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-number\"\u003e3\u003c\/div\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-text\"\u003e\n          \u003cp\u003eInsert the nozzle of your e-liquid bottle into the port and squeeze slowly. Filling gently gives the air inside somewhere to escape and stops liquid backing up out of the port.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vapeverse_products_usage-step\"\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-number\"\u003e4\u003c\/div\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-text\"\u003e\n          \u003cp\u003eStop short of the top. Leave a small air gap rather than filling to the brim, because an overfilled pod has no room for the pressure changes that come with vaping and will push liquid out.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vapeverse_products_usage-step\"\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-number\"\u003e5\u003c\/div\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-text\"\u003e\n          \u003cp\u003ePress the silicone stopper firmly back into place until it is flush and seated all the way round. A stopper that is only half in is the most common cause of a pod that seems to leak for no reason.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vapeverse_products_usage-step\"\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-number\"\u003e6\u003c\/div\u003e\n        \u003cdiv class=\"vapeverse_products_usage-step-text\"\u003e\n          \u003cp\u003eWipe any liquid off the outside of the pod and off the device contacts before refitting.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n\n    \u003ch2 class=\"vapeverse_products_usage-subtitle\"\u003eHow to Prime the Coil\u003c\/h2\u003e\n    \u003cp\u003ePriming means letting the e-liquid soak into the cotton around the coil before any power reaches it. Do this every time you fit a fresh pod, without exception.\u003c\/p\u003e\n    \u003cp\u003eThe reason is simple and worth understanding rather than just following. The coil heats the liquid held in the cotton wrapped around it. If that cotton is still dry when the coil fires, there is nothing to absorb the heat, so the cotton itself scorches. A coil that has been fired dry is finished. The burnt taste that follows does not fade, cannot be rinsed out, and cannot be recovered by refilling. Since the coil in a San Dynasty pod is built in and not separately replaceable, a dry-fired coil means a spent pod, one of the three in your pack gone before it delivered a single decent draw.\u003c\/p\u003e\n    \u003cp\u003eAfter filling, leave the pod to stand so the cotton can draw the liquid up. You can help it along by fitting the pod to the device and taking two or three gentle draws with the device switched off, which pulls liquid into the wick without generating any heat. Check the manual supplied with your kit for the standing time it recommends, and give it that long before your first powered draw.\u003c\/p\u003e\n\n    \u003ch2 class=\"vapeverse_products_usage-subtitle\"\u003eWhen to Change a San Dynasty Pod\u003c\/h2\u003e\n    \u003cp\u003eChange the pod when the flavour tells you to, not on a schedule. A pod that has reached the end of its life gives a dull, muted or faintly burnt taste that a fresh fill of e-liquid does not fix, and that is your signal to fit the next pod from the pack.\u003c\/p\u003e\n    \u003cp\u003eThere is no puff count for a San Dynasty pod and no recommended replacement interval, and any figure you see quoted for either should be treated with suspicion. Pod life depends on the resistance you run, the wattage you set, how sweet your e-liquid is and how much you vape, and those variables move too much between users for a single number to mean anything. Sweetened and darker flavours in particular tend to shorten coil life across every pod system, which is why two people running identical hardware can get very different mileage. Taste is the reliable indicator.\u003c\/p\u003e\n\n    \u003ch2 class=\"vapeverse_products_usage-subtitle\"\u003eIf Your Pod Leaks or Spits Back\u003c\/h2\u003e\n    \u003cp\u003eBefore writing off a pod that is leaking or spitting hot droplets into your mouth, check two things, because between them they explain most cases.\u003c\/p\u003e\n    \u003cp\u003eStart with the fill level. An overfilled pod is the usual culprit. With no air gap left inside, ordinary pressure changes have nowhere to go and push liquid out through the airflow path instead. Vape the pod down a little and the behaviour often stops on its own.\u003c\/p\u003e\n    \u003cp\u003eThen check the stopper. A silicone plug that has not been pressed fully home leaves a gap you cannot see but liquid can find. Remove the pod, dry it, seat the stopper properly all the way round and refit. Spitback usually responds to the same two checks, since it is generally excess liquid sitting in the airflow channel getting flicked up by the coil rather than a fault. Taking a slower, longer draw clears it. If both checks come up clean and the behaviour continues, the pod itself has likely failed, and that is what the other two pods in the pack are for.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vapeverse_products_usage\"\u003e\n  \u003cdiv class=\"vapeverse_products_usage-content\"\u003e\n    \u003ch2\u003eAre San Dynasty Pods TPD Compliant?\u003c\/h2\u003e\n    \u003cp\u003eYes. San Dynasty Replacement Pods are sold as 100% UK compliant stock. The pod holds 2ml, which is the maximum tank capacity permitted under UK rules, and the product is sold to over-18s only with age verification at checkout.\u003c\/p\u003e\n\n    \u003ch2 class=\"vapeverse_products_usage-subtitle\"\u003eThe Rules Attach to the E-Liquid, Not the Pod\u003c\/h2\u003e\n    \u003cp\u003eThere is a distinction here that does not apply to prefilled pods, and it is worth being clear about. A San Dynasty pod ships empty. It contains no nicotine at the point of sale, so the nicotine strength limits do not attach to the pod at all. They attach to the e-liquid you buy separately, which must be sold in bottles of 10ml or less at a strength of 20mg\/ml or under if it contains nicotine.\u003c\/p\u003e\n    \u003cp\u003eWhat the pod itself has to satisfy is the 2ml capacity ceiling, which it does. So compliance for a San Dynasty setup has two halves: the hardware side is handled by the pod, and the nicotine side is handled by whatever liquid you choose to put in it. Buy your e-liquid from a UK retailer selling compliant, notified products and both halves are covered.\u003c\/p\u003e\n\n    \u003ch2 class=\"vapeverse_products_usage-subtitle\"\u003eBuying Compliant Stock\u003c\/h2\u003e\n    \u003cp\u003eCompliant stock means product that meets UK requirements on capacity, labelling, ingredients and packaging, and that has been notified to the MHRA where notification applies. Buying from an established UK retailer is the straightforward way to stay on the right side of all of it, and it also means the pods you receive are the ones the manufacturer intended rather than an unverified import. Age verification at checkout is a legal requirement, not an inconvenience, and applies to hardware as well as to e-liquid.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"vv-faq-section\"\u003e\n  \u003cdiv class=\"vv-container\"\u003e\n    \u003ch2\u003eSan Dynasty Pods: Frequently Asked Questions\u003c\/h2\u003e\n    \u003cdiv class=\"vv-accordion\"\u003e\n\n      \u003cdiv class=\"vv-acc-item active\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e1. Are San Dynasty pods refillable or prefilled?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eThey are refillable and ship completely empty. There is no e-liquid in a new pack, so you will need a bottle of compatible e-liquid before you can use one.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e2. How many pods are in a San Dynasty pack, and are they mixed resistances?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eEach pack contains three pods, and all three are the same resistance. You choose the resistance when you order, and there is no mixed or sampler pack, so buying two resistances means buying two packs.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e3. What resistances are available?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eThree: 0.4Ω, 0.6Ω and 0.8Ω. The 0.8Ω gives the tightest mouth-to-lung draw, the 0.4Ω the most open restricted direct-to-lung draw, and the 0.6Ω sits between them.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e4. What wattage should I run each resistance at?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003ePublished guidance puts the 0.4Ω at 25W to 30W, the 0.6Ω at 18W to 23W and the 0.8Ω at 12W to 16W. These figures come from a single retailer listing rather than a manufacturer specification, so check them against your kit's manual. The device sets a starting wattage itself when it reads the pod, so these ranges are for fine-tuning rather than initial setup.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e5. Do San Dynasty pods fit the San Dynasty Pro?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eYes. The same pod fits both the San Dynasty and the San Dynasty Pro. The two devices differ in battery, 14500 in the standard and 16500 in the Pro, but they share the pod, so one purchase covers either kit.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e6. Can I replace the coil inside a San Dynasty pod?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eNo. The mesh coil is built into the pod and is not sold separately. When the coil is spent, you replace the whole pod, and you should not attempt to open a pod to reach the coil.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e7. What e-liquid should I use?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eNicotine salt and balanced 50\/50 e-liquid suit the 0.8Ω and 0.6Ω pods, while lower-strength freebase e-liquid suits the 0.4Ω. High-VG liquid is not suitable in any of the three.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e8. Can I use high-VG e-liquid?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eNo. High-VG blends are too thick to wick reliably through a 2ml pod, which starves the cotton and produces a burnt taste. Stay with 50\/50 blends.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e9. How long does a San Dynasty pod last?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eThere is no published puff count or replacement interval, because pod life varies too much with resistance, wattage, e-liquid and how much you vape. Change the pod when the flavour dulls or turns burnt rather than on a schedule.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e10. Why does my pod taste burnt on a fresh fill?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eThe most likely cause is a coil fired before the cotton had soaked. A dry-fired coil cannot be recovered, so that pod is finished. On the next one, fill it, let it stand as your manual advises, and take two or three draws with the device switched off before your first powered puff.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e11. Are San Dynasty pods TPD compliant?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eYes. The 2ml capacity meets UK requirements and the pods are sold as 100% UK compliant stock to over-18s only. Because the pods ship empty, nicotine strength limits apply to the e-liquid you buy separately rather than to the pod.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n      \u003cdiv class=\"vv-acc-item\"\u003e\n        \u003cbutton class=\"vv-acc-btn\"\u003e\n          \u003ch3\u003e12. Are San Dynasty pods good value compared with buying a new kit?\u003c\/h3\u003e\n        \u003c\/button\u003e\n        \u003cdiv class=\"vv-acc-content\"\u003e\n          \u003cp\u003eReplacing a pod costs a fraction of replacing a device, and each three-pack covers three service cycles. Since the coil is built into the pod, there are also no separate coils to buy across the life of the kit. Current pricing is shown live on this page and at checkout.\u003c\/p\u003e\n        \u003c\/div\u003e\n      \u003c\/div\u003e\n\n    \u003c\/div\u003e\n  \u003c\/div\u003e\n\u003c\/section\u003e\n","brand":"VapeVerse UK","offers":[{"title":"0.8","offer_id":58738418221440,"sku":null,"price":5.99,"currency_code":"GBP","in_stock":true},{"title":"0.6","offer_id":58738418254208,"sku":null,"price":5.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/7849\/4036\/files\/San-Dynasty-Replacement-Pods-by-Orca-Vape-Gerobak.webp?v=1788616181","url":"https:\/\/vapeverse.co.uk\/products\/san-dynasty-pod","provider":"VapeVerse UK","version":"1.0","type":"link"}