Oxva Vprime 2 Kit
What Is the OXVA VPrime 2 Pod Kit?
The OXVA VPrime 2 Pod Kit is a rechargeable, refillable pod vape kit manufactured by OXVA for the VPrime cartridge range. The device features a built-in 3400mAh battery, adjustable output up to 60W, and USB Type-C charging at a 5V/3A rate. The kit supports both auto-draw and button activation, allowing users to choose how they fire the device. A 0.98-inch colour screen displays battery level, wattage, and puff data, while a zinc alloy and IML construction gives the pod kit a durable finish in a compact body measuring 113.12 × 41.2 × 27.7mm.
The OXVA VPrime 2 uses the UNITECH 3.0 system, which pairs dual mesh heating with a U-shaped airflow design to support flavour and vapour production during use. The device is compatible with VPrime and VPrime Dual Mesh cartridges. The included Dual Mesh cartridges are available in 0.4Ω and 0.6Ω resistances, while the original VPrime cartridge range adds 0.2Ω and 0.8Ω options depending on the cartridge model. The cartridge design includes leak protection and supports refilling, and adjustable airflow allows users to customise the draw from a tighter, more restricted inhale to a more open setting with greater vapour production.
The OXVA VPrime 2 is compatible with nicotine salt and freebase e-liquids. The refillable pod system comes in a TPD-compliant version with a 2ml pod capacity. An 8-second safety cut-off stops the device from firing when a draw lasts longer than 8 seconds, and a lock button helps prevent accidental firing. Boost Mode and Eco Mode allow users to choose between higher-powered performance and a more economical vaping experience, positioning the OXVA VPrime 2 as a versatile refillable pod kit rather than a single-setting device.
OXVA VPrime 2 Specifications
| Specification | Details |
|---|---|
| Brand | OXVA |
| Product Name | VPrime 2 Pod Kit |
| Product Type | Refillable pod kit |
| Maximum Output | 60W |
| Battery Capacity | Built-in 3400mAh |
| Charging | USB Type-C |
| Charging Rating | 5V/3A |
| Device Dimensions | 113.12 × 41.2 × 27.7mm |
| Display | 0.98-inch colour screen |
| Activation | Auto-draw and button firing |
| Pod Technology | UNITECH 3.0 Dual Mesh |
| Pod Capacity | 2ml |
| Included Pod Resistances | 0.4Ω and 0.6Ω |
| Compatible Resistance Range | 0.2Ω, 0.4Ω, 0.6Ω and 0.8Ω |
| Airflow | Adjustable |
| Vaping Modes | Boost Mode and Eco Mode |
| Pod Filling | Refillable |
| Compatible Cartridges | VPrime and VPrime Dual Mesh cartridges |
| Construction | Zinc alloy + IML |
| Weight | 150g |
| Colour Options | 6 styles |
Key Features
The OXVA VPrime 2 brings together a large battery, adjustable power, and a refillable pod system. The colour screen displays key device information, while cartridge compatibility gives users a choice of resistance options.
3400mAh Built-In Battery
A 3400mAh battery sits inside the OXVA VPrime 2 and supplies power for regular use. Battery life changes with wattage, pod resistance, and vaping frequency, so higher-powered sessions will draw more from the cell than lower settings. USB Type-C charging at 5V/3A helps keep the pod kit ready for the next session with less time spent at the charger.
Up to 60W Output
Power on the OXVA VPrime 2 can be adjusted up to 60W. A lower setting may suit a softer draw, whereas higher wattage can create a warmer vape with more vapour. Cartridge resistance and personal preference will determine the most suitable level, and the adjustable range gives users room to match the pod kit to each VPrime cartridge.
UNITECH 3.0 Dual Mesh Technology
The UNITECH 3.0 system uses dual mesh heating alongside a U-shaped airflow design. The combination supports flavour and vapour production during use across the compatible resistance range. The cartridge design also includes leak protection, helping to keep the OXVA VPrime 2 cleaner during everyday carrying and use.
Boost and Eco Modes
Boost Mode provides a higher-powered vaping experience, while Eco Mode is designed for a more economical setting. Users can switch between the two, choosing Boost Mode when stronger output is wanted and Eco Mode when a more restrained vape is preferred. The two modes give the OXVA VPrime 2 flexibility across different cartridges and vaping styles.
Auto-Draw and Button Firing
The OXVA VPrime 2 offers both inhale activation and button firing. Users who prefer a simple draw can rely on auto-draw, where a gentle inhale through the mouthpiece activates the device, while the fire button provides direct control over activation. A sliding lock button prevents accidental firing when the pod kit is carried or stored.
Adjustable Airflow
The airflow control changes the amount of air entering through the cartridge. A narrower opening creates a more restricted draw, while a wider opening allows more airflow and greater vapour production. Moving the airflow valve little by little lets users find the draw that feels right for the cartridge resistance and wattage in use.
0.98-Inch Colour Screen
The 0.98-inch colour screen presents information such as battery level, wattage, and puff data at a glance. The display also shows warning messages, including BATTERY LOW, NO POD, SHORT, TIMEOUT, TEMP HIGH, and PLEASE VAPE, so users know when the OXVA VPrime 2 needs attention. The screen theme can be changed with two presses of the fire button.
VPrime Pod Compatibility
VPrime cartridges and VPrime Dual Mesh cartridges are both compatible with the OXVA VPrime 2. The available resistance choices include 0.2Ω, 0.4Ω, 0.6Ω, and 0.8Ω, depending on the cartridge used. Compatibility with the original VPrime range gives users access to a wider selection of replacement cartridges when a pod needs changing.
2ml Pod Capacity
The TPD version of the VPrime 2 cartridge holds 2ml of e-liquid, keeping the pod kit within UK regulations. The refillable cartridge design allows users to add e-liquid when needed rather than replacing the whole pod, and the cartridge works with both nicotine salt and freebase e-liquids.
Zinc Alloy and In-Mold Labeling (IML) Construction
The OXVA VPrime 2 features a zinc alloy body with IML construction, offering a durable finish in a compact design. The device measures 113.12 × 41.2 × 27.7mm and weighs approximately 150g. The construction is available across six styles spanning the Mirage, Black Carbon, and Shard finishes.
What's Included in the Box?
Each OXVA VPrime 2 Pod Kit contains the following items.
- 1 × OXVA VPrime 2 Device (3400mAh)
- 1 × VPrime Dual Mesh Cartridge 0.4Ω 2ml (pre-installed)
- 1 × VPrime Dual Mesh Cartridge 0.6Ω 2ml
- 1 × Type-C Cable
- 1 × User Manual
- 1 × Use Suggestion Card
OXVA VPrime 2 Colours
The OXVA VPrime 2 is available in 6 styles across Mirage, Black Carbon, and Shard finishes. Colour options include Mirage Blue, Mirage Purple, Mirage Pink, Black Carbon, Shard Black, and Shard Gold. Each style uses the same zinc alloy and IML construction, allowing users to choose a finish that suits their personal taste without changing the specification of the pod kit.
Mirage Blue
The OXVA VPrime 2 Mirage Blue edition combines the Mirage finish with a blue colourway.
Mirage Purple
The OXVA VPrime 2 Mirage Purple edition combines the Mirage finish with a purple colourway.
Mirage Pink
The OXVA VPrime 2 Mirage Pink edition combines the Mirage finish with a pink colourway.
Black Carbon
The OXVA VPrime 2 Black Carbon edition pairs a black body with a carbon-style finish.
Shard Black
The OXVA VPrime 2 Shard Black edition combines the Shard finish with a black colourway.
Shard Gold
The OXVA VPrime 2 Shard Gold edition combines the Shard finish with a gold colourway.
How to Set Up and Use the OXVA VPrime 2
The OXVA VPrime 2 comes with a refillable cartridge and a built-in rechargeable battery. Before using the kit, the battery needs to be charged and the cartridge filled with e-liquid. The liquid also needs a few minutes to soak into the coil. Once those parts are ready, the remaining setup is mainly about unlocking the device and choosing the preferred settings.
Step 1: Check the Device
Take the device and cartridge out of the box. The fire button, lock button, screen, Type-C port, and airflow valve are all located on the main body. Remove any stickers, plugs, or protective seals before using the kit.
Step 2: Charge the Battery
Charge the built-in battery through the USB Type-C port with a suitable cable when the battery is low. The OXVA VPrime 2 supports 5V/3A charging, although the device should still be placed somewhere safe during the process. Avoid leaving the kit charging without supervision.
Step 3: Fill the Cartridge
Open the cartridge filling port and add e-liquid carefully. Avoid overfilling the cartridge or allowing liquid to enter the airflow opening. Close the filling port securely before fitting the cartridge to the device.
Step 4: Give the E-Liquid Time to Soak
Newly filled cartridges should not be used straight away. Leave the cartridge to stand for at least 5 to 8 minutes so the e-liquid can reach the coil properly. Skipping the wait may result in a dry or burnt taste.
Step 5: Fit the Cartridge
Place the filled cartridge into the device and press it down gently. A secure connection is important because the kit needs to recognise the cartridge before it can operate normally. Check the screen after fitting it. A "NO POD" message means the cartridge has not been detected.
Step 6: Unlock the Fire Button
The sliding lock controls the fire button. Move the lock to the unlocked position before trying to activate the device. Keeping the button locked prevents accidental firing while the kit is being carried or stored.
Step 7: Turn the Device On
Five quick presses of the fire button within two seconds will turn the OXVA VPrime 2 on. The same five-press sequence switches it off again. Presses that are too slow may not register as a complete command.
Step 8: Take a Puff
The OXVA VPrime 2 supports both auto-draw and button activation. A gentle inhale through the mouthpiece activates the auto-draw function, while button firing is available by holding the fire button while inhaling. The device also has an 8-second safety cut-off, so any draw that continues beyond the limit will stop automatically.
Step 9: Change the Settings
The main controls are accessed through different button combinations once the device is switched on. Two presses change the screen theme, three presses change the output, four presses switch between single and dual mode, and seven presses reset the puff count. The full list of button controls is shown in the table below.
Step 10: Adjust the Airflow
The airflow valve changes the amount of air entering through the cartridge. A narrower opening gives a more restricted draw, while opening the valve further creates a looser inhale with more airflow. Move the valve little by little until the draw feels right.
Step 11: Check Screen Messages
The screen shows a warning when the device detects an issue, and the message usually indicates what needs attention. Stop using the kit if a fault message appears. The meaning of each screen message is listed in the table below.
OXVA VPrime 2 Button Controls
| Function | Button Control |
|---|---|
| Turn the device on or off | Press 5 times within 2 seconds |
| Change the screen theme | Press 2 times within 2 seconds |
| Change the output | Press 3 times within 2 seconds |
| Switch between single and dual mode | Press 4 times within 2 seconds |
| Reset the puff count | Press 7 times within 2.5 seconds |
| Lock or unlock firing | Slide the lock button up or down |
OXVA VPrime 2 Screen Messages
| Screen Message | Meaning |
|---|---|
| BATTERY LOW | The battery needs charging |
| NO POD | The cartridge has not been detected |
| SHORT | A short circuit has been detected |
| TIMEOUT | The 8-second vaping limit has been reached |
| TEMP HIGH | The internal PCBA temperature is too high |
| PLEASE VAPE | Misfire protection has been activated |
Stop using the kit if a fault message appears. An unusually hot device should be left to cool before it is checked again. A short-circuit warning needs particular care, so avoid continuing to vape until the issue has been resolved.
When Should You Replace OXVA VPrime 2 Cartridges?
OXVA VPrime 2 cartridges should be replaced when the following signs become noticeable.
Flavour Starts to Fade
The flavour can become less noticeable as the cartridge gets older. Sweet, fruity, and icy notes may lose their strength, leaving the vape tasting flat compared with a fresh cartridge.
Burnt or Dry Taste
A burnt taste usually means the coil is no longer working properly or the e-liquid is not reaching it as expected. Dry hits can also become more frequent. Continued use is best avoided when the unpleasant taste remains after allowing the cartridge to soak.
Vapour Production Drops
A noticeable reduction in vapour can signal that the cartridge is nearing the end of its usable life. Weaker vapour combined with fading flavour often means the coil is no longer performing as it should.
E-Liquid Runs Low
Refill the cartridge before the e-liquid level becomes too low. Allowing the coil to operate without enough liquid may cause a dry or burnt taste. Replace the cartridge when refilling no longer restores normal flavour or vapour production.
Leaking or Gurgling
E-liquid leaking from the cartridge or a persistent gurgling sound can indicate a problem with the pod. Small amounts of condensation may occur during normal use, but repeated leaking should not be ignored. Replacing the cartridge is a better option than continuing with a damaged one.
Harsh or Unusual Throat Feel
A stronger throat sensation than usual may suggest that the cartridge is no longer delivering vapour normally. A harsh draw accompanied by weak flavour, low vapour, or a burnt taste is a clear reason to fit a fresh cartridge.
Frequently Asked Questions
Yes, the OXVA VPrime 2 is a refillable pod kit. The device works with refillable VPrime cartridges, allowing users to add e-liquid through the filling port when needed rather than replacing the whole pod. The TPD-compliant cartridge holds 2ml of e-liquid and is compatible with both nicotine salt and freebase e-liquids.
The OXVA VPrime 2 has a built-in 3400mAh battery and charges through USB Type-C at a 5V/3A rate. Battery life varies with wattage, pod resistance, and vaping frequency, so higher-powered sessions will use the battery more quickly than lower settings or Eco Mode.
Output on the OXVA VPrime 2 can be adjusted from 5W up to 60W, depending on the selected setting. A lower wattage suits a softer draw, while a higher wattage creates a warmer vape with more vapour. The most suitable level depends on the cartridge resistance and personal preference.
The OXVA VPrime 2 supports VPrime and VPrime Dual Mesh cartridges. Resistance options vary by cartridge and include 0.2Ω, 0.4Ω, 0.6Ω, and 0.8Ω. The kit includes two Dual Mesh cartridges in 0.4Ω and 0.6Ω, with one pre-installed in the device.
Yes, inhaling through the mouthpiece activates the OXVA VPrime 2 through its auto-draw function. Button firing is available as another option by holding the fire button while inhaling. An 8-second safety cut-off stops the device from firing when a draw lasts longer than 8 seconds.
Boost Mode provides a stronger output for a higher-powered vaping experience, while Eco Mode offers a more restrained and economical setting. Users can switch between the two modes on the OXVA VPrime 2 to suit their preferred style and to manage battery use.
Press the fire button five times within two seconds to turn the OXVA VPrime 2 on. Five quick presses will also switch the device off. Presses that are too slow may not register as a complete command, so the sequence should be completed within the two-second window.
Press the fire button three times within two seconds, then adjust the output to the preferred level. The 0.98-inch colour screen displays the current wattage alongside battery level and puff data, so the selected setting can be checked before vaping.
Four quick presses of the fire button within two seconds change the OXVA VPrime 2 between single and dual mode. The device must be switched on before the button combination will register.
Allow a newly filled VPrime cartridge to sit for at least 5 to 8 minutes after filling. The coil needs time to absorb the e-liquid, and using the cartridge straight away may result in a dry or burnt taste.
Move the airflow valve on the main body to make the draw tighter or more open. A narrower opening gives a more restricted inhale, while a wider opening allows more airflow and greater vapour production. Adjust the valve little by little until the draw feels right.
Slide the lock button into the locked position to prevent the fire button from activating the device. Unlocking the button restores fire-button activation. The lock helps prevent accidental firing while the OXVA VPrime 2 is being carried or stored.
The company provides three UK delivery methods with fixed pricing and defined delivery timelines. Each delivery option uses a tracked courier service and dispatches orders from the United Kingdom on working days only. Shipping availability, pricing, and delivery speed depend on the selected courier method and the customer’s delivery location.
The shipping methods offered by the company cover standard tracked delivery and next-working-day delivery. Each courier service differs in delivery speed, cost, and operational handling.
Royal Mail Tracked 24
- Dispatch: Same working day before cut-off
- Delivery speed: 1 working day
- Tracking: Full tracking via Royal Mail
- Price: £4 per order
- Remote postcodes may take one extra working day
Royal Mail Tracked 48
- Dispatch: Same working day before cut-off
- Delivery speed: 2 working days
- Tracking: Full tracking via Royal Mail
- Price: £3 per order
DPD Next Day
- Dispatch: Same working day before cut-off
- Delivery speed: 1 working day
- Tracking: Live tracking with notifications
- Price: £4 per order
- Monday–Friday delivery only
The dispatch team processes orders from Monday to Friday after 15:00. Orders placed on weekends are dispatched on the following Monday, excluding UK bank holidays.
Delivery Time Disclaimer
Next-day delivery is not guaranteed. Delays may occur due to courier capacity, postcode restrictions, weather, or unforeseen circumstances.
Tracking and Delivery Handling
All dispatched orders include tracking details sent by email. Delivery instructions entered at checkout are not passed to courier drivers.
Missing or Delayed Deliveries
- Missing deliveries must be reported within 10 working days
- Incorrect or missing items must be reported within 5 working days
Packaging and Compliance
Orders are shipped in plain, discreet packaging. Age-restricted products dispatch only after successful age verification.
Customers must initiate returns via the official contact form and provide full order details. Support responds within forty-eight hours. Original packaging is required.
Return Exceptions
- No returns for opened or used items unless faulty
- No returns for mods that fail to charge
- Original packaging required for all returns
Faulty Items
- Faults investigated within 48 hours
- Refund or store credit if fault confirmed
- Faults must be reported within 72 hours of delivery
Battery and Charging Safety
- Do not charge overnight
- Maximum recommended charging time: 1 hour
Warranty Summary
- Batteries & chargers: 1-month guarantee
- Mechanical mods: 30-day guarantee
- E-liquids & drip tips: no warranty
- Tanks, RDA, RDTA: 30-day DOA warranty
Related Products
