The Hayati Pro Max Plus 6000 is one of the most popular pod kits in 2025, especially for people who want a simple, smooth, and long-lasting vaping experience. It’s made for beginners, disposable vape users, and anyone who wants strong flavour without learning complicated settings. With its 2ml TPD-compliant pod, 10ml auto-refill tank, mesh coil system, and 850mAh rechargeable battery, this device is built for convenience and consistent performance.

If you recently shop the hayati 6k, this guide will show you exactly how to use the Hayati Pro Max 6k the right way, step by step. You’ll learn how to set it up, charge it safely, insert the pod correctly, avoid dry hits, and know when it’s time to replace the pod.

Whether you’re switching from disposables or starting your vaping journey, this walkthrough will make everything simple and easy to understand.

How to Use the Hayati Pro Max Plus 6000?

Step 1 — Preparing the Device Before Use

Before you start using your Hayati Pro 6k, it’s important to prepare the device correctly. This helps the airflow work properly, keeps the auto-draw sensor accurate, and ensures smooth flavour from the first puff.

Follow these steps:

1. Remove all protective stickers

• Peel off any seals covering the airflow holes, pod base, or charging port.

• These stickers are only for transport and must be removed to allow proper airflow.

2. Take off the rubber cap from the mouthpiece

• This cap protects the mouthpiece during shipping.

• Remove it so you can inhale correctly.

3. Check the transparent tank

• Make sure the 10ml internal tank has visible e-liquid.

• If the tank looks empty, do not use the device — the pod will not refill.

4. Inspect the magnetic pod connectors

• Look for dust, lint, or debris around the connection area.

• A clean connection ensures strong flavour and correct firing.

5. Tap the LED battery display

• Lightly tap or activate the screen (if your model supports it).

• Confirm the battery level is showing and the display is working.

Why This Step Matters

Proper setup prevents:

• Weak vapour

• Blocked airflow

• Pod misfires

• Dry or burnt hits

• Auto-draw sensor failure

Preparing the device takes less than a minute but makes a huge difference in performance and flavour.

Step 2 — Charging the Device

Before you start vaping, make sure your Hayati 6k has enough power. The device uses an 850mAh rechargeable battery, designed to give smooth and consistent performance throughout the day.

How to charge it safely:

1. Connect a USB Type-C cable

• Plug the USB-C cable into the charging port at the bottom of the device.

2. Use a standard 5V wall adapter

• Avoid fast chargers (such as phone fast chargers), as they can damage the battery over time.

• A regular 5V adapter is the safest option.

3. Watch the LED battery display

• The screen will show the charging progress.

• Wait until it reaches 100%.

4. Disconnect once fully charged

• Unplugging the device immediately after it reaches full charge helps extend battery life.

Charging Time

• 35–45 minutes for a full charge

• Long enough to protect battery health, but fast enough for daily use

Why Proper Charging Matters

Correct charging helps:

• Improve battery lifespan

• Maintain stable power output

• Prevent overheating

• Keep the coil performing at its best

Using the right charger and avoiding overcharging will keep your Hayati Pro Max working smoothly for a long time.

Step 3 — Inserting the Pod

To get the best performance from your prefilled pod kit, the pod must be inserted correctly. A proper fit ensures smooth airflow, strong flavour, and steady vapour.

Step 1: Hold the device upright

Keep the device standing upright with the top facing you. This helps the auto-refill system work properly once the pod is inside.

Step 2: Check the pod base

Look at the bottom of the pod. Make sure the metal contacts and magnets are clean and free from any dust or liquid. A clean connection allows the device to fire correctly.

Step 3: Align the pod

Line up the pod with the opening at the top of the device. The pod shape matches the slot, so it should slide in smoothly without any force.

Step 4: Push down until it clicks

Press the pod gently into the device. You should feel a small click, which means the magnets have locked it into place. The pod should sit flat and not wiggle.

Step 5: Confirm the fit

A properly seated pod ensures:

• The 10ml tank can refill it correctly

• The mesh coil stays fully saturated

• The auto-draw sensor activates when you inhale

If the pod feels loose or the device doesn’t fire, simply remove it and reinsert it until it fits securely.

Step 4 — Switching Flavours

The Hayati Pro Max Plus 6000 is designed as a single-flavour pod system, which means it does not have a flavour switch or slider like dual-flavour devices. Each pod comes with one specific flavour, and the 10ml internal tank automatically feeds that same flavour into the pod.

If you want to change flavours, the only way is to replace the pod with a new one. Since the tank is connected to the pod, mixing flavours inside the same pod isn’t possible and can affect taste or performance.

How to switch flavours safely:

1. Finish or remove your current pod.

2. Insert a new Hayati Pro Max Plus 6000 Prefilled pod with the flavour you prefer.

3. Allow the pod a few minutes to absorb e-liquid from the internal tank before vaping.

This setup keeps the device TPD compliant, prevents flavour contamination, and ensures each flavour stays clean, smooth, and accurate.

Step 5 — Start Vaping

Once your pod is inserted correctly, you can start using the Hayati vape right away. This device is completely button-free, which makes it very beginner-friendly. It uses a draw-activated system, meaning it will automatically fire when you inhale.

How to vape the right way:

To begin, place the mouthpiece gently between your lips. Take a slow and steady inhale — not too fast and not too hard. When you pull in, the auto-draw sensor activates the mesh coil inside the pod, creating smooth vapour with strong flavour.

This device is designed for an MTL (mouth-to-lung) style, which feels similar to smoking a cigarette. Simply inhale into your mouth first, then breathe it in naturally.

Tips for the best experience:

• Take slow, relaxed puffs to let the coil heat evenly

• Avoid taking rapid back-to-back hits

• Give the pod a second between puffs so the coil stays fully soaked

• If you inhale too hard or vape too quickly, you might get a dry or harsh hit

When you use slow, steady puffs, the 10ml auto-refill system keeps the pod saturated, and the mesh coil delivers clean, rich flavour every time.

Step 6 — When and How to Replace the Pod

The Hayati Pro Plus 6k has a 2ml pod that is automatically refilled by the built-in 10ml tank. Since the pod keeps refilling itself, you don’t need to add e-liquid manually. However, the pod will eventually wear out and need replacing.

Knowing when to change the pod will help you avoid burnt tastes, weak vapour, or dry hits.

When should you replace the pod?

You’ll know it’s time to switch to a new pod if you notice any of the following:

1. Flavour tastes weak or dull

If the flavour suddenly drops or tastes faded, the coil inside the pod is getting worn out.

2. Burnt or harsh taste

A burnt taste means the coil has reached the end of its life, even if there is still e-liquid in the tank.

3. Vapour production decreases

If the vapour becomes thin or almost disappears, the coil can no longer heat properly.

4. The internal 10ml tank is empty

Once the tank has no more e-liquid, the pod will stop refilling. This usually happens close to the end of the device’s 6000-puff life.

5. Near the expected puff limit

If you are close to the 6000-puff mark and the flavour starts dropping, it’s time for a new pod.

How to replace the pod correctly

Replacing the pod is quick and simple:

Step 1: Remove the pod

Hold the device firmly and pull the old pod straight up. It will detach easily because of the magnetic connection.

Step 2: Unbox a new Hayati-certified pod

Always use original Hayati Pro Max Plus pods to ensure proper auto-refill, flavour quality, and TPD safety.

Step 3: Insert the new pod

Place the new pod into the slot and push down gently until it clicks into place. The magnets will lock it in.

Step 4: Let the pod soak

Wait 3–5 minutes before vaping.
This gives the mesh coil time to absorb e-liquid from the internal tank, preventing dry hits.

Once the pod is fully saturated, you can start vaping again with fresh flavour and smooth vapour.

Final Thoughts

The Hayati Pro is one of the easiest and most reliable pod kits for beginners and everyday vapers. Its simple design, auto-refill system, and mesh coil make it smooth to use, while the strong battery and sealed pod keep the experience clean and hassle-free. By following the steps in this guide — from inserting the pod correctly to knowing when to replace it — you can enjoy consistent flavour, steady vapour, and a long-lasting vaping experience.

Whether you're switching from disposables or trying a pod kit for the first time, the Pro Max Plus 6000 gives you everything you need for smooth, satisfying vaping with no confusing settings. Just charge it, insert the pod, take slow puffs, and enjoy reliable performance from start to finish.